Roofing dumpster rental in Sandy Springs
Need a roll-off dropped for shingles? We’ll set a 10-yard dumpster by 9 a.m.—pull it the same afternoon your crew finishes the tear-off.
Roofing Tear-off Dumpster Sizing by Squares
How big a roll-off do you actually need for your Sandy Springs roof tear-off? Most contractors use this rule: one square of asphalt shingles equals two-thirds of a cubic yard. Our low-wall 20-yard container handles 30 squares; exceeding the weight limit affects your final tonnage. We set the roll-off precisely where you need it in Fulton.
15-Yard Roofing Dumpster
- Capacity: 15 cubic yards
- Fits: 15–20 squares of asphalt shingle
- Best for: Single-layer ranch and bungalow tear-offs
The 10-yard can fits a tight driveway for small roof tear-offs, keeping shingle weight within a single haul.
20-Yard Roofing Dumpster
- Capacity: 20 cubic yards
- Fits: 25–30 squares of asphalt shingle
- Best for: Most two-story residential tear-offs
The 20-Yard Container is the roofing workhorse because low side walls let crews ground-throw shingles with minimal scaffold setup.
30-Yard Roofing Dumpster
- Capacity: 30 cubic yards
- Fits: 35–45 squares of asphalt shingle
- Best for: Multi-layer tear-offs and small commercial roofs
A 30-yard bin keeps larger tear-offs moving without a second haul-out slowing crew demobilization.
Asphalt Shingle Weight and Tonnage Planning
The three-tab shingle averages 250 pounds per square, architectural laminate closer to 400; underlayment adds another 100 pounds per square. A 25-square tear-off lands between three and five tons before you add underlayment. How does that translate to a 10-yard dumpster? The hooklift truck routes these loads while respecting the container’s weight limit on a single pickup.
When jobs mix shingles with framing or sheathing offcuts, we route that container to our standard c&d debris service—keeping your site organized. Pure asphalt tear-offs run on a separate line, ensuring you pay only for the waste you produce.
Driveway Placement for Roofing Crew Workflow
We stage the roll-off by angling the swing-door end toward the starting eave in Sandy Springs. Placing Driveway Boards under the rollers before the can touches concrete ensures your driveway stays unscarred. After setting a six-foot tarp perimeter for a clean nail sweep, your crew gains an unobstructed lane for debris. Consult our roof tear-off container sizing or check the asphalt shingle disposal best practices guide to keep your site efficient.
Drop angle
Rear door toward the roof line
Set the swing-door end facing your eave so your crew can manage walk-in loading and ground-throw along one clear path.
Surface protection
Wooden planks under every roller
Loaded shingle weight can gouge concrete; driveway boards stay under the rear rollers for the full rental window.
Sweep zone
Six-foot tarp perimeter
Stage magnetic sweepers on the tarp side so nail cleanup runs in parallel with loading your construction waste.
Tile, Slate, and Metal Roof Tear-off Containers
Concrete tile, natural slate, and standing-seam metal punish a container that was not built for the density; these materials weigh significantly more than asphalt shingles. We route a reinforced 30-yard bin with a heavier floor plate and ribbed sides to handle the stress. We cap the fill volume well below the visual rim to ensure legal axle weight: our lowboy transport keeps everything safe. We also provide a general construction debris service for mixed loads.
Same-day Pickup for Fast Roof Project Turnover
Tear-offs run tight; we route the swap-out to meet the crew’s demobilization window so the roll-off clears the driveway for inspection or gutter reinstall before the homeowner walks back on site. Dispatch handles same-day haul-out in Fulton; the driveway stays clear!